ZiP PAD     Dual Port X.25 Sync Card     Single Port X2.5 Sync Card
 
Zip PAD
The ZipPAD is a packet assembly/disassembly X.25 device (PADs). The primary functions of a PAD are to exchange information via data packet form with a remote PAD in the X.25 packet switch network, and to convert these data packet information to be a data character stream to the asynchronous equipment and vice versa. PAD works with local or remote asynchronous (by using modem) terminals and uses the synchronous modem, such as DSU, to connect to the X.25 packet network. In addition to mentioned above, it can be treated as concentrator or multiplexer.
 
The ZipPAD , with its "extended PAD management functions and system commands", can be fully configured from any local or remote asynchronous terminal through a leased or dial-up line. These enhanced functions make your ZipPAD be easily handled and controlled. Its security is that the supervisor is only allowed to operate or use the extended PAD management functions and system commands.

 
The ZipPAD be easily connected to any public switching data network (PSDN) or private packet-switching network (PPSN). The ZipPAD can be specified to be a DTE or a DCE , and be back-to-back setting.

 
The ZipPAD provides a X.25 synchronous port or two optionally. These dual ports work in load-sharing mode, or in backup mode, or in fixed routing mode to improve performance and to enhance reliability.

 
The ZipPAD provides multiple architectures that meets your business needs. ZipPAD series, from PC's synchronous card , personal PAD to enterprise, with variable asynchronous ports to fit into your business needs.
 
Features
1.Standards: CCITT Data Link Layer, Packet Layer
2.International Standard Conformance: X.3, X.28, X.29, X.25, X.121.
3.High quality, high speed (up to 64Kbps, ISDN B channel).
4.High Reliability
5.PVC, SVC online setting
6.Major international PDNs certified.
7.Extended PAD management functionss
  a.Status monitoring
b.Call record log
c.Traffic statistics/trace
d.Port state control
e.Remote management
8.Password protection.
9.Transparent to most popular PC communication software.
10.Support terminal emulation, file transfer, E-mail etc..
11.Modem signal controls for leased or dial-up operations.
12.Number of terminal ports extensible.
Specifications
Hardware
Processor
Intel 80188
HDLC Controller
Z8530/8MHz, V.35/ RS449 (optional)
Input/Output Ports
Synchronous Ports
1 or 2
Asynchronous Ports
2 or 4 or 8
Interface
V.24/RS232, V.35/RS449 (optional)
Truck Speed
64Kbps
Clocking
Internal or External
Connection
Leased or Dial-up modem
Link Level
Framing
LAPB/HDLC
Addressing
DTE or DCE
Numbering
Modulo 8 or Modulo 128
Parameters
K:1 to 127, N1:21 to 4101 octets T1, T2, T3:100ms to 25 sec
Packet Level
Service
PVC and/or SVC
Address Format
ITU-T X.121, 15 digits
Packet Size
16 to 4096 octets
Flow Control Nego.
Yes
Window Size
1 to 127
Q/D/M Bits
supported
Parameters
T20=180, T21=200, T22=180, T23=180
Software
ITU-T X.25
fully supports
ITU-T X.3/X.28/X.29
fully supports
Security
password protection
Traffic Statistics
supported
On-Line Help
supported
Traffic Trace
supported
Protocol Monitor
supported
Mechanical
Dimension
234 x 164 x 40 mm
Temperature
operating 0 Celsius to 70 Celsius
Relative Humidity
operating 10% to 85%
Certification
  FCC part 15 class A; Telenet, USA; Pacnet DCI, Taiwan
 
Copyright © 2006 ZiPCOM Co., Ltd. All rights reserved.