It¡¦s Not Only Wireless
Three Wireless Operating Mode
AP Mode / AC Client Mode / AC Client + AP Mode
The ZiPEG-Wifi W200/W110 is high performance Wireless Router +
VoIP gateway that provides small and medium-size offices with faster
wireless internet access and VoIP service. With a built-in IEEE 802.11b/g
wireless AP/AC client, the W200/W110 offers maximum mobility via 54Mbps
data transmissions.
The W200/W110 supports standard SIP (RFC3261), which is suitable for
IP telephony service deployment to fulfill connection to emerging SIP-based
networks. Based on the ITSP VoIP service, two/one SIP accounts can be
configured.
- Application Scenario:
AC Client Mode
AP Mode 
- Wireless LAN:
1 . Complies with 802.11g and 802.11b (2.4GHz) Standards
2 . Data Rates up to 54Mbps
3 . Support WEP, WPA data encryption to secure wireless
connection
4 . Both Support Wireless Access Point Mode and Wireless
Client
5 . Mode Modulation Technique
802.11b¡G DSSS (Direct Sequence Spread
Spectrum) with BPSK (1Mbps),
QPSK
(2Mbps), and CCK (5.5 and 11Mbps)
802.11g¡G OFDM
6 . Transfer data rate: 802.11g : 54, 48,36,24, 18,12,9,6Mbps,
auto-fallback
802.11b:
11, 5.5, 2,1Mbps, auto-fallback
7 . Output Power : 15~18dBm(CCK), 10~13dBm(OFDM)
8 . RF sensitivity : @PER<0.08 ,11Mbps < -84dBm(typical
)
@
PER<0.08, 54Mbps < -70dBm(typical )
- Telephony Specification:
1 . Voice Codec: iLBC (internet Low Bitrate Codec),G.711(A-law
/£g-law), G.729 AB, G.723 (6.3 Kbps / 5.3Kbps), G.276 (16, 24, 32, 40
Kbps)
2 . FAX support : T.38 FAX Relay,G.711 Fax pass-through
3 . Call Waiting
4 . Call Hold/Resume
5 . Call Transfer: Blind Transfer / Attended Transfer
6 . Call Forward: On Busy Forward / No Condition forward
/ No Answer Forward
7 . Call Screen: Incoming Call Screen (Reject or Forward
Incoming Call) / Outgoing Call
8 . Screen (Blocking Outgoing Call)
9 . Multi-Line Appearance
10 . MWI
11 . DTMF Relay : In-band DTMF Relay / Out-of-band
DTMF Relay (RFC2833)
12 . 3-Way Conference
13 . Peer-to-Peer SIP Call by Dial Plan
- IP Specifications:
1 . SIP (RFC 3261) , SDP (RFC 2327), Symmetric RTP,
STUN (RFC3489), ENUM (RFC 2916), RTP Payload for DTMF Digits (RFC2833),
Outbound Proxy Support
2 . LAN :NAT, DHCP Server
3 . WAN: PPPoE client, DHCP client, Fix IP Address
4 . Network Address Translation: Providing build-in
NAT router function.
5 . Static Routing
6 . Virtual Server
7 . QoS : IP TOS (IP Precedence) / DiffServ
8 . Peer to Peer Call by Dial Plan
- Call Features
1 . Adjustable volume : - 9 db ~ 9 db
2 . VAD (Voice Activity Detection)
3 . Dynamic Jitter Buffer CNG (Comfort Noise Generation)
4 . Lost Packet Concealment
5 . Caller ID Generation: DTMF CID / Bellcore CID /
ETSI CID / NTT CID Generation
- Firewall Security
1 . Stateful Packet Inspection
2 . DoS attack defection
3 . Access Control Service
4 . Content Filtering
5 . IP & Generic Packet Filtering
6 . Real-time Attack Alert and Logs
7 . DMZ Interface for Public Server
- Configuration & Management
1 . Web-based Graphical User Interface
2 . Remote management over the IP Network
3 . Web-based firmware upgrade
4 . Backup and Restore Configuration file
5 . Auto Provision
6 . SNMP v1/v2
- General Specification
1 . AC power : AC100V-240V, DC12V/1.5A,50/60 Hz
2 . Temperature: 0¢XC ~ 40¢XC (Operation)
3 . Humidity: up to 90% non-condensing
4 . Antenna : Reverse connector (RP-SMA) with a detachable
5 . Emission: FCC Part 15 Class B, CE Mark
6 . Dimension : 170 x 100 x 35 mm
7 . Weight: 200g
ZiPEG-WiFi W200/W110 Series Wireless Router + VoIP
|
W200 |
W110 |
Ethernet Port |
1 WAN + 1LAN |
1 WAN + 1LAN |
Telephony Interface |
2x RJ-11 |
2x RJ-11 |
Wireless Module |
802.11 b/g |
802.11 b/g |
Antenna |
One Internal Inverted-F PCB antenna
and one external dipole antenna |
FXS |
2 |
1 |
PSTN Line |
|
1 |
SIP(RFC3261) |
|
|
QoS |
|
|
NAT Traversal |
|
|
Echo Cancellation |
|
|
G.711 a/£g law
G.723, G729,
G.726,iLBC |
|
|
T.38 / G.711 Fax Pass Through |
|
|
NAT Router |
|
|
|
